HomeWhat is EcholinkSystem RequirementsKB1XI Function CodesServer Busy messageEcholink DirectoryBasic SetupModesInterfacingFirewall and RoutersAudio SettingsRecording QSOsEcholink ProxyEcholink ConferencingRepeater LinkingEcholink for I-Phone FAQA Typical ConfigurationStation PhotosEcholink Home pageDownload EcholinkNH Repeater ListingsCurrent Virus Threats

Echolink for I-Phone 

EchoLink for iPhone

What is EchoLink for iPhone?

EchoLink for iPhone is an edition of the EchoLink software that runs on an iPhone or iPod touch. If you own one of these devices and are a validated EchoLink user, you can access the EchoLink system from nearly anywhere where WiFi networking is available. If you have an iPhone, you can also use it to access EchoLink over the cellular data (3G or EDGE) network. EchoLink for iPhone is available free of charge from Apple's App Store.

Does it have the same features as the EchoLink software for Windows?

The iPhone edition focuses on the basic features of EchoLink, such as managing the Station List, connecting and disconnecting, and transmitting and receiving voice and text. Unlike the Windows edition, you can be connected to only one node at a time, and there is no Sysop mode. The user interface has been re-designed to function smoothly on the smaller screen of the iPhone, and to take advantage of some of its built-in hardware features.

The app is prompting me for a password when I start it up. How do I get a password?

Before using EchoLink for iPhone, you'll need to become a validated EchoLink user first. To do this, you will first need to download, install, and run the EchoLink software for Windows as described on this Web site. Once you are validated for EchoLink, you can run the iPhone edition of the software by entering your regular EchoLink password.

If you have a Mac rather than a PC, you can download and install EchoMac instead to begin the validation process.

Can I use it without a microphone on an iPod touch, just to listen?

Yes, as long as you have installed version 1.1 or above. If no microphone is connected, the Transmit button is disabled.

Does it work with a Bluetooth headset or hands-free device?

On an iPhone, yes. Although the app uses the device's microphone and speaker by default, you can switch the audio source to either a paired Bluetooth device or the internal handset audio after startup, using the icon that appears just to the right of the audio-level meter on the QSO tab.

I see there are some Network Connection options on the Settings tab. How do these work?

EchoLink for iPhone has some special networking features to make it work more smoothly with different kinds of mobile and wireless networks.

  • Direct: With this setting, the app communicates with the Internet the same way the Windows edition of the software does. Choose this option only if you are using your own WiFi network and your router has been configured to forward UDP ports 5198 and 5199 to your iPhone or iPod touch.
  • Relay: The Relay setting uses a special set of Relay servers to reach other nodes in the EchoLink system. This mode gives the best performance on a 3G or EDGE network connection because it uses UDP. It's also convenient over WiFi because it requires no router configuration. However, please note the limitations of Relay in the FAQ item below.
  • Public Proxy: In this mode, the app automatically selects a Public Proxy from the current list of available EchoLink proxies. The system attempts to connect to the proxy that is geographically closest to your current location.
  • Custom Proxy:This mode lets you enter information to connect to a specific proxy, such as a private proxy you have set up yourself.
  • Automatic: When Automatic is selected, the EchoLink app will try to choose the most appropriate setting (Direct, Public Proxy, or Relay) by probing the characteristics of the network.

Are there any special limitations of the Relay networking option?

Yes. Although Relay is the default, and will generally give the best performance, the following limitations currently apply:

  • You can initiate a connection, but you cannot receive one; stations that try to connect to you will receive a "No route available" error message. This means that Phone users that are using the Relay mode cannot connect to each other.
  • Because there are only a small number of relay severs, you often cannot connect to the same conference or conference server that another node using the Relay mode is already connected to. This means that two iPhone users that are using the Relay mode often cannot join the same conference at the same time.

I'm having trouble connecting to other stations. Any advice?

  • Check to be sure you have a good, solid network connection. If you are on 3G or EDGE, look for 4 of 5 bars in the signal strength indicator; if you are on WiFi, look for a full-strength signal. Field tests have shown that the cellular data network is not always available even with a strong 3G signal in some situations.
  • If you are getting the message "No route is available to the station you selected", try connecting to a different station, try connecting later, or try Public Proxy instead of Relay. If you still get a similar message even via Proxy, the station you are trying to reach might be an iPhone user behind a Relay, who will not be reachable.
  • Do not try connecting to yourself. This won't work in most situations.
  • Do not use the Direct mode unless you have put in special port-forwarding rules in your router.
  • If you get a message like "Bye Bye", try again after a few seconds.

On the iPhone, can I use EchoLink when I see the "E" symbol at the top, instead of "3G"?

The "E" symbol means that your cellular data connection is using EDGE technology, rather than 3G. The EchoLink app will work on EDGE, but you may notice dropped packets and slow loading of the Station List. 3G networking gives better results.

Am I running up a bill with my carrier when using EchoLink on iPhone?

If you're connecting over 3G instead of WiFi, you are using your carrier's cellular data network to communicate with the Internet. If you have a flat-rate, "unlimited" data plan with your carrier (such as AT&T in the United States), you are probably not being charged extra, since streaming audio is permitted within the data plan. If you have any doubts, check with your wireless provider to be sure.

Any plans for creating other editions of EchoLink for other smartphones?

Users have asked about the possibility of an EchoLink app for BlackBerry, Symbian, PalmOS, Android, and Windows Mobile. Unfortunately, these platforms are all very different from each other, so developing software for each would involve five separate development efforts, in addition to iPhone. Development has begun on an edition of EchoLink for Android (with no release timetable yet), but there are no projects underway right now to develop editions for other platforms.

Copyright © 2002-2010 Synergenics, LLC.  EchoLink® is a registered trademark of Synergenics, LLC.

Echolink - Worldwide Comms via VHF/UHF